Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
If you love having a coffee brew without putting yourself in trouble, the Keurig K-Mini Plus Coffee Maker is your friendly partner. But this delicacy needs your care. The more you care for the machine, the less trouble you will go through. There are different ways in which the Keurig k10 would be troubling you.
The problems with keurig K10 can be many; you need to know the nature of the issue. The problem can be power supply, water leaking, variation in product taste or heating up of the machine. All you need to do is address the right issue properly with the correct method to get out of trouble.
Let us categorize the common issues and see for their solutions to get your machine up to date and in working condition.
Keurig K10 Troubleshooting Guides: 9 Common Problems And Solutions
As like Keurig’s faulty power system, you may face difficulty with your Keurig k10 model coffee maker. Here is a list of all the common issues that might happen to your Keurig K10 Mini. Have a look at the problems and their nature before you peep into the best possible solutions:
Problem 1: Machine not Turning On
It may happen to you that you plug in the wire and the machine doesn’t come alive. It can either be an issue with the outer cable or the power button. May it be or may it not be, the machine can have an internal issue.
Solution 1:
Look for the socket and the power cable by trying different sockets. Also, check the power button carefully to see if it is damaged. If all else fails, call customer service.
Problem 2: Water Leaking From the Machine
Leaking from the machine can have different reasons. It depends on the place where the water is leaking. If the Keurig is leaking while preheating, you could have a clog in the K-cup holder or both exit needles. Otherwise, if the leak is from the bottom, the problem can be a tear in the hose or seal inside the machine or the rubber band at the bottom of the water reservoir.
Solution 2:
In case the Keurig leaks while preheating, you need to work on cleaning the clog in the exit needles or the k-cup holder. Also, clean the valve at the bottom of the water tank or just check if it is clean.
Sometimes the hose or seal at the bottom is giving trouble. Shake the bottom or tap it from the bottom by turning it upside down. Also, remove the water tank. If it is leaking, you need technical support.
Problem 3: No Proper Brewing
This happens when your Keurig asks for descaling and doesn’t brew. And sometimes, it doesn’t ask for descaling, or you descale it, and it still doesn’t brew. The problem can either be with the valve at the bottom of the water tank. Sometimes the water tank is not placed properly.
Solution 3:
For this problem, there can be an informal checkup of the whole machine by the user.
- Descale the brewer.
- If it still doesn’t work, try these picks: unplug and plug the machine. Lift up and place back the water tank. If the water is enough and the problem persists, clean the reservoir by rinsing and drying up with a hand towel. Look for the clogs at the bottom valve.
- Use a paperclip to clean the top and bottom exit needles.
- After all this, most likely, your brewer would respond beautifully and not call the customer service.
Problem 4: Water Not Dispensing
One of the common issues is the improper dispensing of water from the machine. You might not get the full cup of coffee or coffee from a Keurig with coffee grounds as residue.
Solution 4:
It happens when you have clogged coffee grounds in the brew basket. You need to rinse it with mild soap and water and fix it again. After fixing, some water rinses would add to the cleanliness.
The buildup of calcium is also one of the reasons why descaling would also help remove coffee grounds from the ready-to-drink coffee cup.
Problem 5: Machine Turning off Again and Again
Sometimes, the machine keeps shutting off. And the auto button may not be working well. It may be because of a broken or clogged needle or a magnet in the machine may not be aligned.
Solution 5:
This problem may direct you to turn off the button that says “auto off”. What is auto off on Keurig? Learn the method of disabling the auto button. This may help keep your machine from tripping.
As mentioned in the problem above, if it is not the case with the auto-off button, look for the needles or call customer service to fix the machine or any unaligned parts.
Problem 6: Improper Heating
You may experience low heating of the product. It may occur due to the water pump. When the water pump is not doing its job, the heating element shuts off.
Solution 6:
Try holding the brew button for a few seconds and sometimes it works on the machine. If the water pump or the heating element is not working, contact support.
Problem 7: Machine Keeps on Pumping Water
The water keeps on being pumped by the Keurig; it can be caused by the mechanism disengaging. Using distilled or softened water can also cause this problem.
Solution 7:
As distilled water is one of the reasons behind the over-pumping of water, it is better to pour the water out, rinse the brewer and refill it with fresh water.
Problem 8: Leftover Coffee Residue in Coffee
Having the coffee grounds in your brew would turn your mood from positive to negative. This happens mostly when you use distilled or softened water in the machine. This results in messy coffee.
Solution 8:
There are two things you could do to get rid of coffee grounds. One, run the brewer many times with water alone, without the k-cup, to wash away the grounds. The advice is to do regular cleaning.
Problem 9: Bitter or Weaker Taste of Coffee
Coffee that does not have the desired flavor is completely unacceptable. For that, you must look for the exit needles and the K-cup holder. The oil buildup can mix with the coffee when it passes through the dispenser. Another straight reason can be the expiration of the K-cup.
Solution 9:
It is again the regular cleaning advice that is the key to it. Always look for the expiration date of the k-cup if you feel that the taste has changed.
Frequently Asked Questions (FAQs):
How do I handle the brewer if it gives the wrong command “add water”?
If this is what your Keurig keeps doing, you need to focus on clogging issues. This happens when the reservoir, exit needles, or valve are clogged. Unclogging by cleaning would help.
What if the descaling light stays on?
The descaling light stays turned on when you have not descaled the machine. If it stays on even after descaling, your descaling is not done. Here is how you can learn more about proper descaling and the workings of a brewery.
Why is my Keurig K10 making loud noises?
The Keurig may be broken or sitting on a hard surface. It may be clogged or be an older model. The Keurig makes noise, but if the noise is louder, you might look for the issue.
Why is my Keurig K10 not responding to button presses?
This might occur due to fitting problems or due to the supply of power. If the problem still persists, you need to call the customer to solve the issue.
Conclusion:
Like any other machine, going through the proper channel is good. Reading and following the Keurig K10 Owner’s Manual would help you stay on the right track. You need to be more disciplined with the machines you see. Watch the video to learn more about the Keurig K10 model. I wish you a safe and good time with your mini coffee brewer.
