Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
Turning on the Keurig Supreme Plus is not an issue at all. Simply hold the power button for about 10 seconds or less until the machine turns on or its digital screen lights up. However, if your brewer won’t turn by pressing the power button, then the question is why the Keurig supreme plus will not turn on.
When an appliance like the Keurig Supreme Plus won’t turn on, it could be caused by a variety of factors. It’s important to diagnose the problem correctly before attempting any repairs.
If you face the same issue with your Keurig supreme plus, don’t worry. Today, I’m going to show you how to troubleshoot the issue. It’s usually the kind of problem that can be fixed with things that you can do yourself.
Reasons Why Keurig Supreme Plus Won’t Turn On
There could be several reasons why your Keurig Supreme Plus won’t turn on. Some common reasons are:
- Faulty Power source
- Damaged Power cord
- Water reservoir
- Unresponsive Circuit breaker
You can do many things to fix these problems, but it is very important to first identify the issue with your machine to see why your Keurig supreme plus will not turn on.
Keurig Supreme Plus Won’t Turn On: 4 Causes And Solutions
Here are several solutions to all the causes of your Keurig not turning on:
Cause 1: Faulty Power Source
The machine may not be getting power from the outlet. Did you know that a bad power source can render the Keurig K10 inoperable?
Solution 1:
Check to make sure the outlet is functioning correctly by plugging in another appliance. Ensure that the Keurig is properly plugged into a functioning outlet. You may also want to try plugging the machine into a different outlet to see if this resolves the issue.
Cause 2: Damaged Power Cord
Firstly, if the power cord is damaged, it will cause the machine to not receive power. This will result in the Keurig supreme plus not turning on because the machine will be unable to receive any power at all.
Solution 2:
The power cord may be damaged, causing the machine to not receive power. Inspect the power cord for any damage or signs of wear and tear. If the cord is damaged, it may need to be replaced.
Cause 3: Problem With The Water Reservoir
If there is a problem with the water reservoir of your brewer, you need to confirm the issue. The machine may not turn on if the water reservoir is empty or not properly seated. In this case, the keurig k supreme does not brew the entire cup.
Solution 3:
To fix the problem with the water reservoir of your keurig supreme plus, ensure that the water reservoir is properly seated and filled with water. The machine will not turn on if the reservoir is empty.
Cause 4: Error Message on the Display Screen
If you are seeing an error message on the display screen of your Keurig Supreme Plus, it typically indicates that there is a serious problem with the machine. The error message itself can contain information regarding the problem with your machine.
Solution 4:
When the error message appears on the display screen, you may be able to find out whatever the problem is as it will be mentioned on the screen. So, you can take action according to the problem or take it to a professional to help sort the issue out. This will help out with your keurig supreme plus not turning on.
How To Turn Off The Descale Light On a Keurig Supreme Plus:
To turn off the descale light on a Keurig Supreme Plus, you will need to perform the descaling process. The descaling process is important to maintain the optimal performance of your Keurig coffee maker and prevent any potential damage. Here are some of the common things you should do:
- Turn off your Keurig Supreme Plus and unplug it from the power source.
- Fill the reservoir with a descaling solution or white vinegar according to the instructions.
- Turn on the machine and run a brew cycle.
- When that is done, discard the solution in the mug or container and repeat the process until the reservoir is empty.
- Repeat the process but with fresh filtered water this time to flush out any remaining descaling solution.
The descale light on your Keurig Supreme Plus should turn off automatically once the descaling procedure is finished.
How Do I Reset My Keurig Supreme Plus?
Like the k920 reset, a Keurig Supreme Plus reset is possible.
- To reset your supreme plus brewer, all you need to do is to first turn the machine off by pressing the power button off for 5 seconds.
- Then, unplug your brewer and leave it like that for several minutes
- Turn it on and then start a new brewing cycle.
Your Keurig should operate normally if the reset was successful; however, if it doesn’t, you might need to get in touch with Keurig customer service.
Have Any Questions?
Does Keurig have a fuse?
Keurig has a fuse and to check whether the fuse is blown or not, you need to make some observations. First, remove the water reservoir and search for a hole at the bottom of the reservoir. Place your finger on the hole and turn the brew button on, if there’s a click, that means the fuse is not blown.
Is there a restart button on Keurig?
No, there isn’t a reset button on the keurig brewers. However, there are some methods you may try to reset your brewer.
What if my keurig stops working?
If your keurig stops working, turn the brewer off, remove the plug for several minutes and then plug it back in and turn it on. The brewer should turn on and work properly.
How long is the Keurig warranty?
Keurig gives a warranty of one year from the date of purchase.
Why does my keurig supreme plus shut off?
In many instances, a keurig turns off while brewing because the K-cup hasn’t been punctured by a needle that is found in the K-cup basket; moreover, it can also shut off due to a clogged brew needle or a faulty water reservoir.
Parting Thoughts
If you are encountering issues with your Keurig Supreme Plus, there are various troubleshooting steps you can take to resolve the issue. Checking the power source, power cord, water reservoir, and circuit breaker are basic troubleshooting steps that can help determine the cause of the issue.
Error messages on the display screen can also indicate the cause of the problem and prompt you to take the necessary steps to resolve it. If these steps do not resolve the issue, you may need to contact Keurig customer service or a professional repair service for further assistance.
