Nespresso Vertuo Plus Won’t Turn On [5 Issues & Fixes]

You may experience times when your Nespresso Vertuo Plus won’t turn on, which can be extremely annoying. Fortunately, there are several reasons why you can’t turn on your Nespresso Vertuo Plus. Most of them are easy to resolve.

Firstly, check that the machine is plugged in and that the power outlet is functioning correctly. The power cord or internal component may be faulty if the machine still does not turn on. In this case, contacting Nespresso’s customer service for assistance is recommended. You should not attempt to open or repair the machine yourself, as this could cause further damage.

Here, I’ll provide you with practical solutions to help you troubleshoot the common causes of your machine. Hopefully, this article will help you fix your Nespresso Vertuo Plus.

Nespresso Vertuo Plus Won’t Turn On: Issues with Fixes

Nespresso Vertuo Plus users often encounter problems when they cannot turn the machine on. The good news is that this issue can be resolved with some simple troubleshooting steps. Let’s see how that goes.

If your Nespresso Vertuo is not working, read this troubleshooting guide to identify and resolve common issues with the machine.

Issue 1: Power Outlet Issues

The power outlet you are using may need to be supplying electricity properly. There could be a fault in the outlet, or it may not be receiving power from the main electrical source. It’s important to ensure that the outlet is functioning correctly before troubleshooting further.

Fixes:

Using these tips, you will be able to resolve any malfunctions you encounter:

Check The Power Outlet:

Check if another known working device, such as a lamp or phone charger, receives power. If the device works, then the power outlet is functioning properly. So, you can move on to the next steps.

Plug Into Another Device:

If the device doesn’t work, try plugging it into a different outlet in the same room or area. It helps to verify if the issue is specific to the outlet. The device will work in a different outlet if the original one is defective.

Contact With Expert:

If you discover a faulty outlet, consult a qualified electrician or switch to another power source.

Nespresso Vertuo cleaning cycle not working? Follow these link to troubleshoot and restore the cleaning functionality for a pristine machine.

Issue 2: Power Cord Problem

The power cord connecting your Nespresso Vertuo Plus to the power outlet may have a problem. There could be a damaged or frayed wire, or the connection between the cord and the machine may be loose.

Fixes:

If you have any problems, you can use these tips to resolve it:

Examine The Power Cord:

Examine the power cord carefully for any visible signs of damage, such as cuts, frayed wires, or exposed insulation. If you notice any issues, it’s essential to replace the power cord to avoid potential electrical hazards.

Re-Insert Connection:

Disconnect the power cord from both the Nespresso machine and the power outlet. Then, firmly reinsert it into both ends to ensure a secure connection. When the power cord loosens due to movement or accidental disconnection, the machine cannot be turned on.

Contact Customer care:

For guidance on obtaining a replacement power cord, contact Nespresso customer support or refer to the user manual.

Issue 3: Power Switch Position:

A faulty power switch may be affecting the performance of your Nespresso Vertuo Plus machine. The machine could not receive power. Then, turn on if the power switch is accidentally turned off or does not make proper contact.

Fixes:

Follow these steps in order to resolve the issue with the power switch:

• Locate the power switch on the side or back of the machine.
• Check that the power switch is in the “on” position.
• Toggle the power switch back and forth a few times to ensure proper contact.
• Test the machine by pressing the appropriate buttons or switches.
• If the machine still doesn’t turn on, contact Nespresso customer support or refer to the user manual for further assistance.
• Always refer to official Nespresso documentation or contact customer support for accurate help.

Note: Remember, always refer to the official Nespresso documentation. Also, you can contact their customer support for the most accurate and up-to-date assistance tailored to your specific model.

Issue 4: Power Supply Problem

There could be an issue with the internal power supply components of the Nespresso Vertuo Plus. This may involve a malfunctioning power converter or other electrical components responsible for distributing power within the machine.

Fixes:

You can resolve the power supply issue by following these steps:

Check the Power Cord:

Inspect the power cord for any visible signs of damage, such as cuts, frayed wires, or exposed insulation. If you identify any issues, it’s important to replace the power cord to avoid potential electrical hazards.

Verify Power Cord Connection:

 Disconnect the power cord from both the Nespresso machine and the power outlet. Then, firmly reinsert it into both ends to ensure a secure and proper connection. Sometimes, the power cord can become loose, preventing the machine from receiving power.

Soft Reset:

Perform a soft reset by unplugging the machine from the power source and waiting for approximately 5 minutes. This allows the internal circuits to reset. Afterward, plug it back in and attempt to turn it on again. This can help resolve temporary glitches in the power supply.

Test with a Different Outlet:

If possible, try plugging your Nespresso Vertuo Plus into a different power outlet to rule out any issues with the original outlet. This will help determine if the problem lies with the outlet or the machine.

Contact Customer Support:

The user manual or Nespresso customer support can offer further assistance if none of the steps described above resolve the power supply issue. If necessary, they can provide specific troubleshooting steps or guide you through the repair process.

Note: Always refer to the official Nespresso documentation or contact their customer support. They can provide you with the most accurate and up-to-date assistance tailored to your model.

Issue 5: Internal Component Failure

Various internal components of the Nespresso Vertuo Plus. Such as the power supply unit or control board, may experience malfunctions or failures. These issues can disrupt the normal functioning of the machine. Thus the Nespresso vertuo next won’t turn on.

Fixes: 

Here are the steps you need to follow in order to resolve a machine malfunction:

Troubleshooting Steps:

Refer to the user manual provided with your Nespresso Vertuo Plus. It may contain specific troubleshooting steps and guidelines to help diagnose and resolve common issues.

Contact Customer Support:

 If the troubleshooting steps in the user manual do not resolve the problem, it is advisable to contact Nespresso customer support. Provide them with details about the issue and the steps you have already taken. They will be able to provide further guidance or arrange for repairs if necessary.

Warranty Coverage:

If your Nespresso Vertuo Plus is still under warranty, inform customer support about the warranty status. They may be able to provide repair services or replace the machine if the warranty covers the issue.

Keurig won’t power on after descaling? Try these troubleshooting tips to address the issue and revive your coffee maker’s functionality.

How to Reset Nespresso Vertuo Plus?

To reset the Nespresso Vertuo Plus coffee machine, please follow these step-by-step instructions:

Step 1: Ensure the machine is turned off. If it’s currently on, press and hold the power button until the machine shuts down.

Step 2: Locate the lever on the top of the machine and open it fully. This will expose the brewing unit.

Step 3: Press and hold the lever down for about 5 seconds. The machine will make a series of beeps, indicating that it is entering the descaling mode.

Step 4: While holding the lever down, press the power button once. Continue to hold the lever and the power button for about 7 seconds.

Step 5: Release both the lever and the power button. The machine will emit a longer beep, signaling that the reset process is complete.

Step 6: Close the lever to its original position.

Step 7: Turn on the machine by pressing the power button. The Nespresso Vertuo Plus should now be reset to its factory settings.

Note: It’s worth noting that this reset process is specifically for the Nespresso Vertuo Plus model. If you have a different model, the steps may vary. Always refer to the user manual provided with your specific machine for accurate instructions.

Frequently Asked Questions (FAQS):

Sum Up

The Nespresso Vertuo Plus is a highly-rated coffee maker that is designed to offer convenience and ease of use. However, if your Nespresso vertuo plus won’t turn on, you can try a few things. Troubleshooting steps can help resolve issues, such as checking the power source, seating the water tank, or contacting customer support.

Remember always to follow the manufacturer’s instructions and safety guidelines when attempting to troubleshoot any electrical appliance. If all else fails, it may be time to consider contacting a professional technician or seeking a replacement.