Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
You may struggle with Nespresso Essenza mini troubleshooting and searching for an easy solution, right? Then, you’re in the right place. Fortunately, there is an easy solution to troubleshooting the common issues of Essenza mini machines.
First, inspect the reason behind the issue. If the machine isn’t heated up, it may have less power. If your Essenza mini keeps blinking, it is in descaling mode or may have electrical errors. After inspecting the cause, go for easy fixes, which this article discusses.
I’ll discuss practical solutions to troubleshoot common issues with the right guidelines. Hopefully, you’ll be able to fix the issue within a few minutes.
5 Common Problems With the Nespresso Essenza Mini Machine [Causes and Easy Solution]
Many users of the Essenza mini coffee machines face almost the same issues. Here are the 5 common issues discussed with troubleshooting tips. With this easy guideline, you can fix your Essenza mini machine problems in a few minutes. Stay tuned.
Did you know why Nespresso Vertuo cleaning cycle not working? You can visit this link to know the problems and their possible solutions.
Problem-1: Coffee is Not Hot Enough
There are a few reasons why your coffee won’t be hot! Maybe you last descaled the machine a long time ago, or your machine needs more power. Again, using a cold cup can also be the reason behind it.
Easy Fixes:
Follow these tips to resolve the problem in a few minutes-
Descale the Nespresso Essenza Mini Machine:
Nespresso itself recommends descaling the coffee maker once every 3 months. If you still need to get descaling, then go for it. It only takes approximately 20 minutes to descale. Make sure you’ve followed all the instructions given in Nespresso’s Guideline. Source
Brew 5 Lungo Cups Without a Capsule:
Due to the lower pressure of the machine, you can suffer from getting hot coffee from the coffee maker! Here you need to just brew without a capsule and enough pressure will build!
- First, place a 1Liter container under the coffee spout
- Switch on the brewer and raise the level to check whether the capsule is present or not.
- Now lower the level and press the Lungo button to rinse the machine.
- Repeat these steps 5 times.
Use Pre-Heated Cup:
It’ll be better to take coffee in a preheated cup. Pouring on a cold cup can cool down the coffee more quickly. That’s why, first, fill a cup with hot water and wait for 30 seconds. Then, empty the cup and fill it with hot coffee.
Problem-2: Nothing Is Coming Out Of My Nespresso
If no coffee or water comes out after pushing the brew button, that might be the cause of improper water tank positioning. Also, there might be a blockage in your coffee maker machine. If you face problems with your nespresso vertuo coffee machine, you can check out this link.
Easy Fixes:
Check the following tips to solve the issue-
- Fill the water tank and place it properly: Check the water level. If it has low water, then fill it. Again, check whether the water tank needs to be properly positioned.
- Insert the capsule in the right position: If the capsule inserts at a malposition, then correct it. Lift the lever on top of the machine, insert the capsule in the pod holder, and close the lever.
- Try Descaling process: A rinse cycle or descaling can solve the issue of blockage.
Problem-3: Why is My Nespresso Essenza Mini Leaking?
There are several reasons behind noticing water leakage or leakage in capsule areas in Nespresso Essenza mini machines. The malposition of the water tank or capsule is the main reason. Again, any kind of blockage can create this issue.
Note: Your Nespresso Vertuo not pumping water? I will discuss possible causes, review user manual, attempt troubleshooting, and contact customer support if needed.
Easy Fixes:
You can follow the fixes to resolve the issue-
Position the water tank or capsule in a proper area:
- Check the water tank position. Place it in the right position and check whether it leaks further.
- You should insert the capsule at the right place to prevent any leakage.
Descale the Essenza mini machine:
Prevent water leakage by descaling the mini machine. It’ll clear any sediment blockage inside the machine.
Clean the grid plate:
A dirty grid plate is a possible reason why there’s a leakage in the capsule area. If residue is built into the grid plate, then water can’t enter or exit from the capsule area and hence it leaks.
That’s why clean the grid plate with the toothbrush. Then, rinse the machine for a few minutes.
Problem-4: Too Much or Too Little Coffee Coming Out?
Usually, the extraction time of the Nespresso Essenza mini machine button should take 20-25 seconds.
If you’ve noticed that the extraction takes more than 40 seconds or less than 20 seconds, then you may have reprogrammed the pour volume.
That means if you have pushed the brew button to start before it completes the full brewing process, you just accidentally push the button again. That’s why it takes longer or shorter extraction time.
Easy Fixes:
Read the solution tips to fix this common issue-
Reset the Nespresso Essenza mini machine:
The only way to correct extraction time is to reset the Nespresso Essenza machine. It’ll take only a few minutes to resolve the issue. (I will discuss this later below)
Problem-5: Troubleshooting The Irregular Blinking In Nespresso Essenza Mini
It is a common issue where all people struggle, Nespresso Essenza mini won’t stop blinking. The irregular blinking on your Nespresso Essenza mini isn’t an issue. It’s just an indicator indicating a related issue you must fix. Here’s the list of common irregular blinking with reason & easy fixes-
Slow, Steady Blinking:
Slow and Steady blinking indicates that your machine is heating up.
Easy Fixes:
Wait until it warms up. They’ll stop blinking once it gets to the desired temperature.
Fast and Steady Blinking:
If the flashlights are blinking very fast and steady together, the Nespresso Essenza mini is in descaling mode. You may try to descale it or accidentally put it in a descaling mode.
Easy Fixes:
Exit the descaling mode. Here, you must hold both buttons down simultaneously for 5-7 seconds. The light will stop blinking.
Fast and Triple Flashing:
This may occur due to a problem with the machine. Mostly, fast and triple flashing indicates electrical errors.
Easy Fixes:
You may try these easy fixes to resolve this blinking issue-
- Go to the repair: It is the safest idea to take the machine to a repair shop. The electrician will understand better and fix it soon.
- DIY solution-1: You can try it yourself with common fixes. First, unplug the machine and then plug it back. Let it warm up.
Again, unplug it for 30 seconds and hold down one of the buttons for 30 seconds. It helps to drain all the residual power. Then, plug the machine in and see if it stops blinking. It might help! - DIY solution-2: Your Nespresso Essenza is too hot due to continuous use and it starts triple and fast blinking. Therefore, unplug the machine and let it cool down for half an hour.
How to Descale Nespresso Essenza Mini
Nespresso Essenza mini problems have a common solution of descaling the machine. That’s why I have listed step-by-step guidelines to easily descaling your coffee machine within only 15 minutes. Follow the instruction given below-
Possible 10 Instructions to Follow:
- Plug in your machine and press the large cup button to start it. Wait until both lights stop blinking.
- Open the top lever and pod disposal area. Now, make sure that there’s no pod or water inside it.
- Place a cup underneath the machine.
- Take one of the descaling kit packets and pour the kit into a water holder. Fill the rest with plain water until it reaches the maximum line.
- Place the water holder back in its position on the machine.
- Now, press and hold both buttons simultaneously for 5 seconds. If both lights are flashing, then it is set for descaling mode.
- Press the Lungo button. It’ll start running all the solutions in the cup underneath the machine. Once it has poured out all the solution, pour it again into the water tank.
- In the second cycle, if poured-out the solution, then rinse the water tank. Make sure it is clean enough.
- Now, pour clean water into the water tank. Fit it in its position. Place a cup underneath the machine and press the Lungo button. Here, clean water will run through the machine and in the cup. Repeat this cycle thrice with new clean water.
- Finally, descaling the machine is completed. Now, press both buttons simultaneously for five seconds to exit the descaling mode.
Warning! Remember to wipe off the whole machine with a damp cloth. Otherwise, the descaling solution splash of the machine can cause corrosion and damage.
How to Reset Nespresso Essenza mini
Follow the only three easy steps to rest the Nespresso Essenza mini back to factory settings.-
- Plug the machine
- Turn it off by pressing both buttons simultaneously.
- Press and hold the Lungo button for about five seconds.
- Wait until both lights start blinking three times. Now, release it.
Did you know why Nespresso Vertuo Plus won’t turn on? If not, check my troubleshooting guide.
Frequently Asked Questions (FAQs):
Why is my Essenza mini blinking 3 times?
If you have reset your Essenza mini back to the factory setting, then blinking 3 times is a confirmation. Again, sometimes it indicates that your machine has an electrical error. Also, when it is too hot, it can blink 3 times.
Why is water not coming out of my Nespresso Essenza?
Maybe the water tank has low water or it is in a malposition. Also, the blockage in the coffee maker machine may cause a struggle to come out of the water.
What can I do if my Nespresso machine is not working?
You can try either the descaling process or resetting the Nespresso Essenza back to factory settings if it won’t work. Or, check whether the parts, like the water tank and capsule, are in the right position. Again, any dirt, blockage or electrical errors may cause the failure to machine work properly. Find out the cause and go for easy fixes.
Why does my Nespresso Essenza Mini keep blinking?
When your Essenza mini takes time to warm up, it blinks slowly and steadily. If it’s blinking fast and steady simultaneously, then it is in descaling mode. Again, triple fast flash indicates that it is reset back to its factory settings.
How do I fix my Nespresso machine from blinking?
Until the machine warms up, both lights blink slowly and steadily. In that case, wait 20-30 seconds to let it warm. If you don’t want to descale right now and the light flashes fast and steady, exit the descaling mode. If the machine blinks three times, you can take it to a repair shop. The electrician will help you better.
Verdict
Never mess up with the manufacturer’s guidelines and instructions. Always use the coffee machine with proper instructions. It’ll help you understand each of the tasks you must do at the right time. This will ensure safety and prevent half of the unwanted issues.
However, you may need help following the Nespresso Essenza mini troubleshooting guide. In that case, you should better go to a repair shop. Professional electricians can easily fix the issue or replace the parts if necessary.
