Breville Clean Descale Light Stays On – Why & How to Fix

The Breville coffee maker delivers hot, delicious coffee instantly. However, if your Breville appliance’s clean/descale light remains on, there might be a problem. Let’s investigate why the breville clean descale light stays on.

Occasionally, the clean/descale light may stay on if you didn’t complete the cleaning process correctly or if your sensor is dirty. To fix this issue, try repeating the cleaning or descaling process, following all instructions carefully. For further assistance, you can also clean the sensor or contact Breville customer support.

Here we investigate why the Breville clean descale light may stay on and how to troubleshoot it effectively. Also, we provide step-by-step solutions to resolve the issue, including descaling, resetting, and replacing parts. Please keep reading!

Why Breville Clean Descale Light Stays On – 6 Common Problems With Easy Solutions!

You might experience problems with the descale light, whether you have a Breville coffee maker or a Keurig K-Supreme Plus. It’s true that this issue can be annoying when the clean descale light doesn’t turn off. There is no need to panic, though. We are here to give you the best guide! You can fix this problem and restore the functionality of your Breville appliance with our 6 simple solutions.  

So let’s identify the issue and find solutions!

01. Dirty Sensors:

You may notice the clean/descale light on your Breville appliance stays on over time if the sensor detects dirt or scale.

Causes:

Causes:

A dirty sensor may occur for the following reasons-

• As minerals and other deposits accumulate in your appliance’s water, the sensor can become dirty and malfunction.
• If cleaning solution residue was left behind after you cleaned or descaled your appliance, your sensor might become dirty.
• When the appliance isn’t cleaned regularly, dirt, and other debris may accumulate on the sensor.

Solutions:

• Clean the Sensor With a Soft Cloth or Cotton Swab: Gently wipe the sensor with a soft cloth or cotton swab to remove any buildup of mineral deposits or other debris. Be careful not to apply too much pressure or use any abrasive materials, as this could damage the sensor.
• Use a Descaling Solution: Use a descaling solution if mineral deposits are what are causing the buildup on the sensor. The right cleaner can help remove the buildup and prevent it from accumulating again.
• Clean the Appliance Regularly: Regularly clean your appliance’s sensor to prevent dust and debris accumulation. Store the appliance in a clean, dry place when not in use. 

Be aware that if you don’t keep your Breville frother machine clean enough, you might experience problems, such as your Breville frother not working. 

02. Incomplete Cleaning or Descaling Process:

The clean/descale light on your Breville appliance will come on if the cleaning or descaling procedure wasn’t properly finished.

Causes:

Here are some reasons why this might happen:

• If you skip steps or don’t complete the process correctly, the light may stay on.
• The light may remain on if too little or too much cleaning or descaling solution is used.
• If you don’t rinse the appliance properly, this residue could interfere with the sensor and cause the light to stay on.

Solutions:

• Review the Instructions and Try Again: In case you did not follow the instructions correctly, review them again and restart the cleaning or descaling process.
• Check The Concentration Of The Cleaning or Descaling Solution: Make sure that you are using the correct concentration of the cleaning or descaling solution according to the instructions.
• Repeat The Cleaning or Descaling Process: To ensure that your cleaning or descaling was completed properly, repeat the process.

03. Clean and Descale The Appliance Thoroughly:

It may be necessary to consider a deeper cleaning or descaling if your Breville appliance’s clean/descale light remains on after cleaning or descale.

You may also like: Keurig Slim Won’t Power On After Descaling– Simple Solutions!

Causes:

Here are some reasons why this might happen-

• The sensor can accumulate mineral deposits if the appliance has not been cleaned or descaled for a while. This can cause the light to stay on even after a cleaning or descaling cycle.
• As the appliance is repeatedly used, residue and debris can accumulate on its internal surfaces and components. Consequently, the light stays on even after cleaning or descaling.

Solutions:

• Use a More Powerful Cleaning or Descaling Solution: A more powerful cleaning or descaling solution may be necessary if the buildup is particularly stubborn. Be sure to rinse the appliance thoroughly after using the solution, as directed by the manufacturer.
• Disassemble and Clean Individual Parts: It may be necessary to disassemble and clean specific parts of the appliance if the buildup is concentrated there. Check the manufacturer’s instructions for advice on disassembling and reassembling an appliance.
• Run Multiple Cleaning or Descaling Cycles: Multiple cleaning or descaling cycles in quick succession can help remove stubborn buildup. Be sure to rinse the appliance thoroughly after each cycle.

04. Damaged Appliance:

If your breville clean descale light flashing, it may indicate a more serious issue requiring repair.

Causes:

Here are some reasons-

• A malfunctioning scale sensor may keep the light on even after cleaning or descaling the appliance.
• In the event of internal damage, the light will likely stay on if it is unable to function properly.

Solutions:

• Contact Breville Customer Service: If the appliance is still under warranty, contact Breville customer service to arrange for repair or replacement. Be sure to provide details about the issue you are experiencing.
• Find a Qualified Repair Technician: If the appliance is out of warranty or if you prefer an authorized repair center, search near you for one.
• Replace The Appliance: Consider replacing the appliance if repairs are prohibitively expensive or if it cannot be repaired.

05. A Malfunctioning Appliance:

Even if you have cleaned, descaled, and repaired your Breville appliance, the clean/descale light may indicate a more serious malfunction.

Causes:

This may be due to a number of reasons.

• When the appliance is used repeatedly or hits something, the internal components can become damaged. This can cause the appliance to malfunction and the light to stay on.
• Software or firmware issues may affect the performance of some appliances. It can cause the light to remain on even after cleaning.

Solutions:

• Replace The Parts: Replace the parts if the repair cost is too high. For replacement options, contact the manufacturer or authorized retailer.
• Update Software or Firmware: Updates to the software or firmware of some appliances may resolve issues like the clean/descale light staying on.

06. Hard Water:

Hard water can build up mineral deposits and scale inside your Breville appliance, causing the clean/descale light to stay on.

Causes:

This may occur for the following reasons:

Water that contains high levels of minerals such as calcium and magnesium is known as hard water. Calcium buildup inside appliances can affect their performance and cause clean/descale lights to illuminate.

Solutions:

• Use Filtered Water: If your water is particularly hard, consider using filtered water in your appliance. This can help reduce the amount of mineral buildup over time.
• Install a Water Softener: If you have very hard water, you may want to consider installing a water softener in your home. You can reduce mineral buildup in your appliances and  water by doing this.

How to Descale Breville Barista Express Clean Light Solid?

Decaling your Breville machine is an important part of regular maintenance. During descaling, calcium deposits are removed from the heating element and water pathway of the machine.

Here are the detailed steps on how to descale your Breville machine:

• Empty the water tank and remove any remaining water.
• Make sure the water filter is removed from the tank to prevent interference with the descaling solution.
• Add descaling solution and water to the water tank. If your water is hard, you can use a mixture of vinegar and water recommended by the manufacturer of your machine.
• Reinstall the water tank in the machine. Press the “2 Cup” and power button together to activate the descale light on your machine. To indicate the descaling mode, a light should come on.
• Simply place a container under the group head and click the “1 Cup” button. The descaling solution will begin to flow through the machine, cleaning the interior.
• Run the solution through the machine for 15-30 minutes. Press the “1 Cup” button again, and continue this process until you’ve used about 2/3 of the solution.
• Point the steam wand at a separate container and let the rest of the solution run through the machine.
• Turn off the machine and let it sit for 10-15 minutes to allow the solution to work on any remaining buildup.
• Empty the remaining descaling solution from the water tank. Then, thoroughly wash the tank with clean water to remove any residue. After that, refill the water tank with clean water and place it back in the machine.
• Press the “1 Cup” button to run clean water through the machine and flush out any remaining descaling solution.
• Repeat this process until the water runs clear and there is no more residue. Once the water runs clear, replace the water filter and refill the tank with clean water.
• Turn on the machine and let it heat up. Finally, power down the machine and power it backup to turn off the descale light.

How To Reset Clean/Descale Light On Breville?

To reset the clean/descale light on a Breville espresso machine, follow these steps:

• Turn off the espresso machine and unplug it from the power outlet. Remove the water tank and empty any remaining water from it.
• Mix the descaling solution according to the manufacturer’s instructions and pour it into the water tank.
• Replace the water tank on the machine and plug it back in. Turn on the espresso machine and wait for it to heat up.
• Press and hold the “Program” button until the light next to “Clean” starts flashing.
• Press the “Shot” button to start the cleaning cycle. The descaling solution will flow through the machine and into a container.
• Once the cleaning cycle is complete, the light next to “Clean” will stop flashing, and the clean/descale light should turn off.
• Turn off the machine and unplug it from the power outlet. Remove the water tank and rinse it thoroughly with clean water.
• Fill the water tank with fresh, clean water and replace it on the machine. Plug the machine back in and turn it on.
• Press and hold the “Program” button until the light next to “Clean” starts flashing.
• Press the “Shot” button to start the rinse cycle. The machine will flush out any remaining descaling solution.
• Once the rinse cycle is complete, the light next to “Clean” will stop flashing, and the machine will be ready to use.

Frequently Asked Questions (FAQs):

Bottom Line

If you’re experiencing a situation where the Breville clean descale light stays on even after descaling, try resetting the light. In some cases, the light may stay on due to a malfunction in the machine. In those cases, contacting the manufacturer’s customer service may be necessary.

However, remember to follow the recommended cleaning and descaling instructions. It will keep your Breville machine in top condition and prevent any potential issues in the future.