Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
One of the most common issues that Braun coffee maker owners face is the Braun coffee maker clean light won’t go off. There is nothing worse than experiencing this. But if you follow the instructions and take proper care, the problem can be repaired.
There are a few potential causes like improper cleaning cycle, sensor malfunction, blockages etc. First, confirm that the cleaning procedure was carried out correctly. Then reset the machine. If the issue persists, it may be an electrical problem that requires professional repair.
We will walk you through the potential causes of the clean light not turning off and the steps you can take to fix it. Also, with our detailed guide, you can get your Braun coffee maker back to its optimal performance in no time.
5 Common Reasons Of a Braun Coffee Maker Clean Light Won’t Turn Off
If the clean light on your Braun coffee maker won’t go off, there could be several common reasons for this issue. Here’s a list of possible causes:
- Incomplete Cleaning Cycle
- Sensor Malfunction
- Residue Or Blockage
- Incorrect Maintenance Timing
- Electrical Or Hardware Issue
Braun Coffee Maker Clean Light Won’t Go Off – Reasons With Easy Fixes!
One of the most common issues with Braun coffee maker clean light stays on even after the machine has been thoroughly cleaned. It affects the performance of the machine and leaves the user wondering what is causing it.
So, we are here to explain why your Braun coffee maker’s clean light won’t turn off and how to fix it. Let’s get rolling!
Reasons 1: Incomplete Cleaning Cycle
The clean light might remain on if the cleaning process is not executed correctly. This can happen due to various reasons, such as:
- One or more steps of the cleaning process were inadvertently skipped or not performed.
- The water-to-cleaning solution ratio needed to be accurately followed.
- The cleaning cycle might have needed to be started or completed properly.
Easy Fixes:
To resolve the issue, consider the following solutions:
- Check the instructions twice: Read the manual or cleaning guide provided by Braun for your coffee maker. Pay close attention to the recommended steps. Make sure that you understand each one thoroughly.
- Rerun the cleaning cycle: Restart the cleaning process and carefully and precisely follow each step. Make sure to measure carefully. Add the appropriate amount of water and cleaning solution (if needed) to the reservoir. Do not interrupt the cleaning cycle of the coffee maker.
- Reset the machine: Unplug it from the power source and wait a few minutes before plugging it back in. If the clean light keeps on, this can help reset the internal settings.
NOTE: If your Breville cleaning cycle is not working, please read this troubleshooting guide to identify and resolve this issues you may be experiencing.
Reasons 2: Sensor Malfunction
The clean light on a Braun coffee maker won’t go off due to a sensor malfunction. It indicates that there may be a problem with the sensor. It is responsible for detecting the completion of the cleaning cycle. This can happen for several reasons.
- One possibility is that the sensor has become faulty or malfunctioned, resulting in inaccurate readings. Wear and tear, electrical problems, or other internal factors can cause this.
- Another reason could be a wiring or connection problem between the sensor and the coffee maker’s control unit. The transmission of incorrect signals causes it.
Easy Fixes:
To solve the issue, use the advice listed below:
- Reset the coffee maker: Try resetting the coffee maker by unplugging it from the power source for a few minutes. Then, plug it back in and see if the clean light resets. This can sometimes resolve minor sensor issues.
- Calibrate the sensor: Some coffee makers have the option to calibrate or reset the sensors. Check the user manual for instructions on calibrating. Alternatively, you can reset your coffee maker’s sensors.
Note: Remember to provide specific details about your coffee maker model and the issue you face when contacting customer support for better assistance.
Reasons 3: Residue Or Blockage
A blocked internal component or leftover coffee residue could cause the clean light on a Braun coffee maker not to turn off. These residues can accumulate and trigger clean light. It indicates that the coffee maker requires cleaning. A buildup of oils and sediments from multiple batches of brewing can cause this.
Easy Fixes:
Following are some possible solutions to troubleshoot this problem.
- Remove all removable parts: Disassemble the coffee maker by removing the filter, filter basket, and carafe. This will allow for thorough cleaning of each part. Check for any remaining blockage or residue as well.
- Clean with warm soapy water: Wash the disassembled parts using warm soapy water. Use a gentle dishwashing liquid and a soft brush or sponge to clean each component thoroughly. Ensure that all residue is removed from hard-to-reach areas.
- Rinse and reassemble: After cleaning, rinse the parts under running water to remove any remaining soap. Make sure to rinse off all traces of soap. It helps prevent any unpleasant flavors in future brews. Once rinsed, reassemble the parts correctly and securely.
- Run a cleaning cycle or brew a new batch of coffee: Run a cleaning cycle after reassembling the coffee maker. Follow the instructions provided in the user manual to ensure proper execution. Alternatively, brew a new batch of coffee to flush out any remaining residue.
Tips: Clean and maintain the coffee maker regularly to prevent the accumulation of coffee residue. You should follow the cleaning instructions provided by Braun for your coffee maker.
Reasons 4: Incorrect Maintenance Timing
Braun coffee makers typically have a recommended maintenance interval. An ongoing clean light could indicate that maintenance is needed. The clean light might remain on if the recommended maintenance interval for cleaning and descaling still needs to be met.
Easy Fixes:
By following these steps, you can easily resolve the issue:
- Refer to the user manual or Braun’s website: Consult your coffee maker’s user manual or Braun’s official website for specific cleaning and descaling instructions. Manufacturers typically provide guidelines on how often maintenance should be performed.
- Follow the recommended maintenance schedule: Once you have determined the recommended maintenance interval, adhere to it. Be sure to set reminders or mark the calendar to remember to clean and descale.
- Clean and descale accordingly: Clean and descale your coffee maker when the recommended maintenance intervals expire. Use the recommended cleaning solutions and procedures to ensure proper maintenance.
Reasons 5: Electrical Or Hardware Issue
If none of the above solutions resolve the issue, there might be an underlying electrical or hardware problem. There are several reasons why a Braun coffee maker’s clean light stays on:
- Faulty electrical connection: There may be an issue with the electrical connection within the coffee maker, such as a loose wire or a damaged power cord.
- Defective sensor or control unit: A malfunctioning sensor or control unit can cause the clean light to remain on. It indicates an electrical or hardware problem.
Easy Fixes:
You can solve these issues by following these tips:
- Contact Braun’s customer support: If you suspect an electrical or hardware problem, I suggest you contact Braun’s customer support. They can guide you through particular troubleshooting methods for your coffee maker’s model.
- Seek professional technician assistance: If customer support cannot resolve, the issue or your coffee maker is no longer under warranty. Then consider hiring a professional technician. They will fix any hardware or electrical issues with your coffee maker.
Caution! It’s important to prioritize safety when dealing with electrical appliances. If you suspect an electrical issue, unplug the coffee maker from the power source and avoid using it until the problem is resolved.
How To Reset Clean Light On Braun Coffee Maker?
You can follow these step-by-step instructions to reset the clean light on a Braun coffee maker.
Step 1: Ensure the Coffee Maker is Turned Off
Ensure the Braun coffee maker is not brewing or in any active mode. Turn off the machine and unplug it from the power source.
Step 2: Locate the Control Panel
Identify the control panel on the front or top of the coffee maker. This is where you will find the buttons and indicators, including the clean light.
Step 3: Press and Hold the Clean Button
Look for the “Clean” button or a similar button labeled with a cleaning symbol. Press and hold this button for approximately 5-10 seconds. This action is typically done while the coffee maker is still unplugged.
Step 4: Plug in the Coffee Maker
While continuing to hold the clean button, plug the coffee maker back into the power source. Keep the button pressed until you see the clean light start to blink or turn off.
Step 5: Release the Clean Button
Once the clean light blinks or goes off, release the clean button. This indicates that the clean light has been successfully reset.
Step 6: Confirm the Reset
Check if the clean light is no longer illuminated. The reset process should have cleared the clean light, and you can now proceed to use the coffee maker as desired.
Note: You should read the user’s manual because the button placement and reset process may vary slightly
So, if you encounter any difficulties or the clean light does not reset after following these steps, it’s advisable to contact Braun’s customer support for further assistance.
Frequently Asked Questions(FAQs):
How do I get my Braun coffee maker out of clean mode?
To exit the clean mode on your Braun coffee maker, simply wait for the cleaning cycle to complete. Once finished, the green LED light will turn off. Dispose of the cleaning solution and rinse the carafe with clean water.
Why is my Braun coffee maker flashing clean?
A Braun coffee maker may be flashing the clean light to indicate that it requires cleaning or descaling. Cleaning and descaling the coffee maker will ensure its functionality.
How long is the clean cycle on Braun?
The clean cycle on a Braun coffee maker can take up to 45 minutes to complete. Allow the cycle to complete to maintain your coffee maker properly.
Why Braun coffee maker clean button won’t turn off?
If the clean button on your Braun coffee maker won’t turn off, it could indicate an issue with the sensor, an incomplete cleaning cycle, or a malfunctioning button. Try rerunning the cleaning cycle, following the instructions carefully. If the issue persists, contact Braun’s customer support for further assistance and troubleshooting.
Final Thoughts
If your Braun coffee maker clean light won’t go off, you can take a few simple steps to troubleshoot and fix the problem. These include descaling your machine, cleaning the filter, and resetting the machine.
However, it’s important to maintain your coffee maker to ensure it functions properly. Plus, they produce the best-tasting coffee. You can get your Braun coffee maker back in working order with some effort. Besides, you will enjoy a fresh cup of coffee every morning.